Carburetor Cleaner

Carburetor Cleaner – a highly effective cleaner for carburetors that requires no disassembly. It quickly, gently, and effectively cleans throttle bodies, air valves, diffusers, jets, and all accessible internal and external carburetor surfaces. Suitable for all two- or four-stroke gasoline engines, with or without catalytic converters.
Properties:
  • Composed of a mixture of high-efficiency organic solvents, without acetone.
  • Completely dissolves and removes all typical carburetor contaminants of various origins.
  • Does not clog engine components located behind the carburetor, such as valves, combustion chambers, etc.
  • Stabilizes idle speed, facilitates cold starts, and improves engine responsiveness.
  • Optimizes intake system performance by cleaning and lubricating its moving parts.
  • Contains substances aggressive to paint and plastics.
  • Reduces fuel consumption (up to 5%) and lowers exhaust gas toxicity.
  • Applicable for cleaning seal-less motorcycle chains, timing chains, clutch components, oil pumps, gears, crankshafts, and other unpainted metallic engine parts.
Application:
Turn off the engine and remove the air filter to gain direct access to the throttle body. Spray the product onto all accessible internal carburetor surfaces, and if necessary, onto external surfaces as well. Allow the product to dry. Reinstall the air filter, ideally replacing it with a new one. Start the engine and let it run at medium RPMs, or allow it to idle for 20 seconds at 2000 RPM to burn off any remaining contaminants in the injection system. If the engine can maintain stable RPMs with the air intake disconnected, cleaning can be done with the engine running. If not, contact a service center for assistance. The cleaning process intensifies when the engine is running, but avoid spraying the product on the airflow sensor or painted parts.
Volume: 450 ml
  • Removes deposits and grease residues
  • Cleans carburetors and injection systems
  • Improves carburetor and idle engine performance
  • Reduces fuel consumption
  • Suitable for 2- and 4-stroke gasoline engines with or without catalytic converters
Instructions for Use:
  1. Shake the can thoroughly before use.
  2. Open the air filter cover and aim the spray at the carburetor or intake pipe.
  3. Spray the product onto contaminated areas.
  4. Allow the product to work for several minutes, then wipe with a clean cloth or let it dry.
Suitable for:
This cleaner is suitable for all 2- and 4-stroke gasoline engines, with or without catalytic converters. It is effective for cleaning carburetors and injection systems, improving engine performance, and reducing fuel consumption.

Capacity: 450 ml